3D Printing

Why 3D Printing Is Over-Hyped : All You Need To Know

3D Printing

Have you gushed over the idea of a 3D printer and made elaborate plans to use it?

Well, 3D printing is not as delightful as it appears to be and requires some hard work on your part. It is important to not let our judgment get clouded.

Does it deserve the hype?

Understanding People’s Expectations

Sure, 3d printing works great. However, you need to understand that not all 3d printers could do all you expect it. It’s important thus to know just what your 3d printer can do.

Strength:

The parts that you print in 3-dimension will not be as durable as their counterparts which were manufactured using traditional means.

The layer-by-layer technique they use can be the source of undoing.

Why? Since they form layers, the product will have laminate weaknesses that can be exploited. Once you break the outer layer, the rest of it will collapse.

These layers are also the reason why the product is so consistent and even, but the con cannot be ignored.

People’s Expectations:

Our expectations have gone rocket-high when it comes to 3D printers. Elaborate advertisements have led us to believe that the process is as simple as printing whatever you like with the greatest of ease. That is the reason that so many of us back out when we finally learn the amount of effort that has to be put in to acquire a flawless print. What we commonly known as 3D Printing is actually a method of rapid prototyping.

Surface Finish:

Don’t expect it to be a smooth process, the surface may not be as smooth as you would like. Instead, you may have to work on it a bit to make it the way you want.

3D Printing

The Speed

3D Printing is not necessarily a fast process. It depends of you design- the more complicated it is; the more time it will take for an accurate print. You cannot hurry up the process and have to wait patiently for the machine to finish its job.

Cost:

Since we are used to printing being cheap, we automatically assume that if we print objects instead of purchasing them, we will be saving a fortune.

Unfortunately, that is not the case. The raw materials you will need often cost a lot. You won’t be making any significant subtraction to your budget. These are the myths that lead people to have unreal expectations.

You should always run a comparative analysis to figure out which is more economical.

The 3dSpeedMachine can help you finding a cheap 3D Printer at your budget to get started, if you don’t purchase yet.

Usability:

To use a 3D printer, you need to have your CAD model design in place. Acquiring it is not always easy. In fact, you have to repeatedly check for mistakes so that there is not a trace of carelessness in the ultimate product.

You can devote some time and master CAD if you are willing. This is a good skill to have for your own development. You can also use the 3D scanning feature, but it is not as easy as it sounds. You can always subscribe to a 3D model library but you should always be careful because a lot of the files may be defective or unprintable.

Now that you are informed of both sides of the coin, you can take a wise decision. 3d printers do deserve the hype but you need to be clear as to what it can and what it cannot do to be able to get the most out of it.

Leave a Reply

Your email address will not be published. Required fields are marked *